Browse all practice questions for the North Carolina Certified Applicator Termite Practice Exam. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

North Carolina Certified Applicator Termite Practice  Exam course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • When are termites most likely to swarm?
  • A "deficient" soil sample contains how much termiticide when applied at the lowest labeled rate according to NC Structural Pest Control Committee Rules?
  • Which wood destroying insect causes damage in soft areas of wood and doesn't follow the grain?
  • What is the most effective preventive measure against wood rot in buildings?
  • The breakdown rate of a pesticide in soil primarily depends on what factor?
  • What is one benefit of using baiting systems over liquid treatments for termite control?
  • After one year, how many termites can a subterranean termite colony contain?
  • What is the most common source of water problems in unventilated crawl spaces?
  • What is the temperature range that can be effective for termite control through heat treatment?
  • What is the most common type of decay fungi found in wood in houses?
  • Which type of trees have cones and needles?
  • Which factor plays a crucial role in the growth of wood decay fungi?
  • Where should an inspector focus their examination inside a crawl space?
  • What are the primary physical differences between carpenter bees and bumblebees?
  • What is the name of the concrete pour that supports the foundation wall?
  • Which of the following could be an independent source of moisture leading to termite infestation?
  • In terms of lifecycle, how long does it take for a termite egg to hatch?
  • What type of termite is most commonly found in structural wood?
  • What does the term “Subterranean” refer to concerning termite types?
  • Which type of beetle is typically involved in wood damage?
  • What might be an indicator of an effective termite treatment?
  • An example of a termiticide that is used for soil treatment is:
  • Which type of termite is known for its above-ground nests?
  • What characteristic distinguishes ants from termites?
  • What is 'termite baiting' primarily used for?
  • What type of insect larva leaves ripples in the surface of galleries?
  • Where are structural infestations by anobiid beetles most common?
  • Which of the following is NOT a sign of termite infestation?
  • What is the physical appearance of a worker termite?
  • Fungi cannot produce their own food because they do not contain which of the following?
  • What is often the primary concern regarding wooden structures and their proximity to the ground?
  • What does very fine wood frass beneath structural wood and pinhole openings in the wood surface indicate?
  • ______ frass contains bun-shaped fecal pellets.
  • What type of wood is most susceptible to termite damage?
  • Pesticides carried in structural service vehicles operated in North Carolina must contain which of the following?
  • Which group of trees is characterized by having needles and cones?
  • What do most termite baits contain?
  • What is a common sign of carpenter ant activity?
  • What characteristic of foams enables them to dispense uniformly under slabs?
  • What environmental factor is essential for the survival of termites?
  • What type of wood do drywood termites typically feed and nest on in North Carolina?
  • What type of pesticide is chlorpyrifos classified as?
  • Are carpenter ant colonies primarily indoor or outdoor?
  • Why is it important to follow label instructions when applying pesticides?
  • What is the primary activity of drywood termites?
  • What is one of the most effective ways to prevent termite infestations?
  • Which layer of a tree is responsible for secondary growth?
  • What is typically the first step in a termite control program?
  • What are formed when a portion of a carpenter ant colony moves indoors while the main colony remains outside?
  • What is one of the main functions of worker termites in a colony?
  • A rhythmic rasping or clicking sound in structural wood is indicative of what?
  • What is the maximum civil penalty the NC Structural Pest Control Committee may impose?
  • What environmental condition should be monitored to prevent subterranean termites?
  • When treating for subterranean termite infestations in a structure, voids in multiple masonry foundations must be drilled and treated at a minimum distance of how many feet?
  • Most basements would be classified as what kind of slab?
  • Which species of termites is most common in North Carolina?
  • What is a common method of inspection for termite presence?
  • According to NC structural pest control law, when must a licensee apply for a registered technician identification card for new non-certified employees?
  • What is a key indicator of a potential wood-destroying insect infestation?
  • What should local treatment of drywood termites include?
  • What is the layer between the inner bark and the sapwood called?
  • Which common source allows wood destroying insects to enter indoors?
  • What kind of damage do winged reproductive termites cause?
  • How many CEUs must a licensee earn to be recertified in any two phases of structural pest control in North Carolina within a five-year period?
  • What does carpenter ant excavated galleries look like?
  • Which method can help in monitoring termite activity over time?
  • What environmental condition promotes the growth of brown rot?
  • Which type of debris is not considered when assessing wood debris and cellulose material in crawl space areas?
  • Which wood destroying insect is often confused with termites?
  • How deep must trenching and rodding treatments extend?
  • What are sub-structural inspections primarily concerned with in termite treatments?
  • Which of the following is NOT a type of slab construction?
  • What are the two main methods used for inspecting a property for termites?
  • Which factor most affects the efficacy of a termiticide?
  • What type of termite is typically associated with the presence of carton nests?
  • What is the primary difference to identify between winged termites?
  • What is the required form for reporting the presence or absence of wood-destroying insects in structures for sale?
  • Lyctid beetles primarily attack _______ wood. While Anobiids primarily attack ________ wood.
  • For how long must inspection and treatment reports be retained?
  • What structure do termites primarily feed on?
  • What factor could cause a termiticide barrier to degrade over time?
  • Which sign may indicate termites are present in a structure?
  • What is the best method for controlling carpenter bees?
  • Where is a carpenter ant queen most commonly found?
  • What is the purpose of the North Carolina WDIR 100 report?
  • Which termite species is not typically found in North Carolina?
  • What type of damage is specifically associated with the Anobiid beetle?
  • To prevent or control growth of fungi in wood, what is the maximum wood moisture content recommended?
  • Moisture content readings of 20, 23, and 25 percent in wooden members of a structure suggest what action?
  • If a King and Queen mate to start a new colony, how many eggs will they initially produce?
  • The true powerpost beetle is the?
  • Why is it important to use treated wood in construction?
  • Which statement regarding molds is true?
  • In termite control, what does the term “retreatment” refer to?
  • Which area is commonly checked for termite activity next to kitchens and bathrooms?
  • Which factor might increase the likelihood of pest infestation in homes?
  • What is the primary role of the soldier termite?
  • Pesticides are more likely to reach groundwater in which type of soil?
  • Which of the following can be a physical barrier to prevent termites?
  • What is one method to treat a dirt-filled porch?
  • What is the optimum time for adult powderpost beetle activity in North Carolina?
  • Imidacloprid belongs to which chemical class?
  • Why is moisture control critical in preventing termite infestations?
  • What must all application equipment used for wood destroying organism pesticides be equipped with, except for small air compressed sprayers?
  • Which locations are common places to find an indoor carpenter ant nest?
  • What is the lifespan range of the old house borer?
  • What is the primary purpose of monitoring stations used in termite management?
  • Which of the following actions can help reduce the risk of termite invasion?
  • Most structural lumber is classified as which type of wood?
  • Which wood destroying pest makes round exit holes?
  • How would you describe the hole made by a carpenter bee?
  • Where is a frequent inspection area inside the structure for termite presence?
  • In terms of pesticide application safety, which of the following materials should always be utilized?
  • During a termite inspection, what should an applicator check for?
  • Which statement is true regarding wood moisture content and wood boring beetles?
  • What is a key advantage of liquid termiticides over bait systems?
  • True or False: If a treatment is performed with a WDIR-100, a copy of the written agreement and warranty must be included with the report.
  • How many trips are generally required for a pre-construction termite treatment?
  • What can be a direct consequence of untreated termite damage?
  • What distinct feature do soldier termites possess?
  • True or False: Pelleted wood frass attached to joists or headers is considered visible evidence of termites.
  • Which of the following would NOT be an effective tool for a termite inspection?
  • What is one of the main benefits of wood preservation treatments?
  • What is a common misconception about termite damage?
  • Which of the following is NOT a type of wood boring beetle?
  • What is the primary role of worker termites in a colony?
  • Which wood treatment method is effective in preventing termite damage?
  • During which months are termites most active in North Carolina?
  • True or False: Evidence of wood destroying organisms must not be removed during a WDIR-100 inspection.
  • What does Lyctid Beetle damage look like?
  • In which situation would trenching be used for termiticide application?
  • What precautions should be taken when applying termiticides?
  • What is the economic cost of termite damage in the United States annually?
  • What are swarmers in the context of termites?
  • What is the primary purpose of a termite inspection?
  • What should be done if termite activity is found during an inspection?
  • Which of the following visual signs may indicate past termite activity?
  • What is the classification of any violation of the provisions of the North Carolina Structural Pest Control Law?
  • What is a common reason for termite damage to be overlooked in homes?
  • Which type of slab construction does not have a separate footing?
  • Are surface molds or mildew fungi capable of weakening wood?
  • What does Integrated Pest Management (IPM) involve in the context of termite control?
  • What is the primary role of the queen termite within a colony?
  • According to NC regulations, what depth is required for establishing a continuous termiticide barrier?
  • Which two types of slabs are typically equipped with perimeter expansion joints?
  • In terms of tree classification, what do hardwoods typically lose in the fall?
  • Are stumps classified as cellulose debris in a crawlspace?
  • What do wood boring beetles primarily depend on for survival?
  • What is a common method to monitor termite activity?
  • How can structural wood be protected from termite damage?
  • What is one benefit of early detection of termite infestations?
  • What is the proper disposal method for containers of termiticides?
  • Do carpenter ants attack sound, dry lumber?
  • Which of the following is commonly damaged by powderpost beetles?
  • What is one way to prevent termite infestations in new constructions?
  • Why should carpenter bee holes not be plugged immediately after insecticide treatment?
  • What minimum distance should all voids in bearing walls be treated from evidence of subterranean termite infestations?
  • Should inside vertical barriers and outside vertical barriers be implemented simultaneously in pre-construction termite treatments?
  • What is the inner part of a woody stem made of dead cells known as?
  • Under ideal conditions, how long can a queen termite live?
  • Which of the following are the three main castes in subterranean termite colonies?
  • For guaranteed treatments of powderpost beetles, the initial liability period regarding active infestations is how many months from the original treatment date?
  • What is the primary characteristic that differentiates fungi from green plants?
  • What action should be taken if wood-destroying organisms are found during an inspection?
  • What structural problem usually indicates an active infestation of wood-destroying pests?
  • What is the purpose of a soil treatment in termite control?
  • Name a common method used to treat moisture problems in homes.
  • What do subterranean termites need to survive?
  • Metallic Woodborer, borisa beetle, and bark beetle are examples of what type of beetle?
  • Which of the following tools is NOT typically used for inspecting termites?
  • What is cellulose?
  • What physical sign can indicate a termite infestation?
  • Is it acceptable to apply less than the label rate during a termite pre-construction treatment?
  • What is the first piece of wood that is attached to the foundation wall called?
  • Which regulatory body is responsible for overseeing pesticide application in North Carolina?
  • Where should a properly installed flow meter be located in a large volume sprayer system?
  • What is a physical difference between ants and termites?
  • Which termiticide is not typically used for soil treatment?
  • What must be submitted if there are deviations from specified termite treatment standards?
  • What organism in the hindgut helps termites break down cellulose?
  • In what situation would a termite inspector need to recommend fumigation?
  • What is an important factor in controlling termite populations?
  • Why might untreated wood be more susceptible to pests?
  • Carbamate and organophosphate pesticides inhibit which enzyme in the human nervous system?
  • What does the term "wood-decaying fungus" refer to?
  • How far will carpenter ants forage from their nests?
  • True or False: Heartwood generally has a greater resistance to insect attack and decay than sapwood.
  • How deep should termiticides be applied in the soil?
  • What characteristic distinguishes termites and ants in terms of body structure?
  • Which type of trees usually lose their leaves in the fall and produce seeds enclosed in fruit or nuts?
  • What is the application method for liquid termiticides?
  • What characteristic is common among all types of termites?
  • Which insect is known for causing damage primarily in damp or decaying wood?
  • What moisture content percentage do carpenter ants prefer?
  • Inspecting joints is crucial when searching for termites in what area of a building?
  • What is the correct term for termite treatment that prevents infestation?
  • Which is the most common termite species found in North Carolina?
  • How do termites communicate with one another?
  • What is the general recommendation for the control of ambrosia beetles found in structural wood?
  • How many eggs does a mature queen termite lay per year?
  • Which statement is true regarding the antennae of ants and termites?
  • In which type of construction is conventional liquid termite treatment NOT recommended?
  • Which of the following is a primary component that termites feed on?
  • What do fecal pellets from drywood termites resemble?
  • What kind of barriers can be installed during construction to prevent termites?
  • What is the benefit of using kiln-dried wood in structures?
  • What material should gloves worn to prevent pesticides from contacting hands be made of?
  • What is the smallest crack through which termites can enter?
  • What chemical was historically used for termite control but is now banned?
  • Which materials should be avoided in landscaping to help deter termites?
  • Which pheromone attracts other termites to a food source?
  • What type of bait systems are commonly used for termite management?
  • What technique should a pest control professional use to avoid contaminating drinking water while applying termiticides?
  • What is one common place to inspect for termites on the outside of a structure?
  • After 3 to 5 years, how many termites are typically found in a mature colony?
  • According to NC Structural Pest Control Committee Rules, where must restricted use pesticides NOT be stored?
  • Which condition is known to promote termite infestations?
  • Are carpenter ants always black in color?
  • Deviations from the minimum requirements for sub termite control must be corrected within what time frame?
  • What is a key treatment method recommended for controlling drywood termites?
  • What is the limitation of a structural pest control operator with an inactive license?
  • Which of the following practices can aid in early detection of termites?
  • When external slabs prevent trenching, how far apart can rod holes be placed?
  • Termite treatments are generally ineffective in which of the following construction types?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy